ADS7843E
Берр Браун
- Lifecycle
- Active
- Stock
- 6691 ПКС
- Package
- SSOP-16
- Series
- Сбор данных - контроллеры сенсорного экрана
Это подробное сравнение ADS7843E и ADS7841ES/2K5G4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS7843E and ADS7841ES/2K5G4 are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7843E is a dedicated 4-wire resistive touchscreen controller with an on-chip switch-driver matrix and pen-interrupt output, whereas the ADS7841ES/2K5G4 is a general-purpose 4-channel 12-bit ADC without touchscreen drive circuitry. Their interface timing, control-word format, and pin functions differ, so a direct board-level swap is not supported without redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841ES/2K5G4 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility in most designs. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same power domain. |
| Package / Mounting | SSOP-16 (surface mount) | SSOP-16 (surface mount) | Identical package and footprint allow physical board-level interchangeability. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings mean both suit the same environmental conditions. |
| Sampling Rate | Up to 125 kSPS | Up to 200 kSPS | Higher sampling rate in the ADS7841 allows faster signal acquisition, which may matter for high-speed applications. |
| Internal Reference | External reference required | External reference required | Both require an external reference, so reference circuitry must be provided in either case. |
| Power Consumption | Low power (approx. 500 µA at 5 V) | Low power (approx. 500 µA at 5 V) | Comparable power draw means similar thermal and battery-life impact in portable designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841ES/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touchscreen controller with an integrated 12-bit ADC and on-chip drivers for touchscreen panel switching. The ADS7841ES/2K5G4 is a standalone 12-bit, 4-channel serial ADC without touchscreen drive circuitry. The ADS7843E is designed specifically for touchscreen digitizer applications, while the ADS7841ES/2K5G4 is a general-purpose 4-channel ADC.
Both devices are offered in a 16-pin SSOP package, but their pin functions differ. The ADS7843E includes touchscreen drive outputs (X+, X-, Y+, Y-) and a PENIRQ output, whereas the ADS7841ES/2K5G4 provides four analog input channels (CH0–CH3) and does not include touchscreen drive or pen-interrupt functions. They are not pin-for-pin interchangeable.
No. The ADS7843E integrates touchscreen panel drive switches and a pen-interrupt output that the ADS7841ES/2K5G4 does not provide. A direct substitution would require external circuitry to drive the touchscreen panel and detect pen contact, and the pin functions are not compatible. Substitution requires full validation against the manufacturer datasheets and the target design.
Both the ADS7843E and the ADS7841ES/2K5G4 are 12-bit successive-approximation ADCs with a serial SPI-compatible interface. The ADS7843E is specified as a 12-bit touchscreen controller, and the ADS7841ES/2K5G4 is specified as a 12-bit, 4-channel serial ADC. Both use a serial interface for communication with a host controller.
Both devices operate from a single supply in the 2.7 V to 5.25 V range, per their respective manufacturer datasheets. Designers should confirm the exact specified operating range and any reference voltage requirements in the official datasheet for each part before finalizing a design.
The ADS7843E is specifically designed as a 4-wire resistive touchscreen controller, integrating the analog switches needed to drive the touchscreen panel and a PENIRQ output for pen-contact detection. The ADS7841ES/2K5G4 is a general-purpose 4-channel ADC and does not include touchscreen drive or pen-interrupt functions, so it is not intended as a direct touchscreen controller replacement.
Both parts are offered in a 16-pin SSOP package. However, because the pin functions differ between the touchscreen controller and the general-purpose ADC, the package similarity does not imply electrical or functional interchangeability. Always verify package dimensions, pin assignments, and land patterns against the official datasheets.