MPU-9150

Изображения являются только для ссылки

MPU-9150

+БОМ

IMU ACCEL/GYRO/MAG I2C 24LGA

  • ПроизводительТДК InvenSense

  • Мфр. Часть #MPU-9150

  • В наличии4901

365 Дни гарантии качества

7*24 часы обслуживания каранти

90-гарантия послепродажного дня

Гарантия подлинного продукта

Спецификации

Атрибут Ценность
Series MotionTracking™
Part Status Obsolete
Sensor Type Accelerometer, Gyroscope, Magnetometer, 9 Axis
Output Type I2C
Operating Temperature -40°C ~ 85°C
Package / Case 24-TFLGA Module
Supplier Device Package 24-LGA (4x4)
Mounting Type Surface Mount
Packaging Tape & Reel (TR)

Обзор

Description

MPU-9150 is a 9-axis MEMS motion sensor from InvenSense (now part of TDK) that combines a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer in one package. It communicates over a digital interface (I2C) to host microcontrollers and includes a Digital Motion Processor (DMP) to fuse data and output orientation (quaternions or Euler angles), gravity, and linear acceleration, plus sensor events. The magnetometer is AK8975. It’s low-power, compact, and widely used in smartphones, wearables, drones, and AR/VR controllers. Typical use involves calibration and sensor-fusion libraries to obtain stable attitude estimates.

Equivalent

Equivalent 9-axis IMU options to MPU-9150:
- MPU-9250 (InvenSense)
- MPU-9255 (InvenSense)
- ICM-20948 (TDK InvenSense)
- LSM9DS1 (STMicroelectronics)
Note: pinout, interfaces (I2C/SPI), and register maps differ; verify compatibility for your design.

Features

MPU-9150 features (concise):
- 9-axis MEMS IMU: 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer (integrated via I2C master).
- Digital Motion Processor (DMP) for on‑chip sensor fusion: outputs quaternion/orientation, gravity, linear acceleration; supports gesture, tap and activity detection.
- 1024-byte FIFO for efficient data buffering; multiple data outputs available.
- I2C interface up to 400 kHz; default slave address 0x68.
- Power: 2.4–3.6 V supply; low power modes.
- Full‑scale ranges: Accelerometer ±2/4/8/16 g; Gyro ±250/500/1000/2000 °/s; Magnetometer up to ~±4800 μT.
- 16-bit data resolution for all axes; on‑chip temperature sensor.
- Programmable digital filters and sample rate configuration.
- Interrupts: data ready, motion, FIFO overflow, etc.
- Compact package (e.g., 24‑pin QFN).
These summarize the core capabilities of the MPU-9150.

Pinout

- Pin count: 24-pin LGA/QFN package.
- Function: A 9-axis MEMS IMU (accelerometer, gyroscope, and magnetometer) with an integrated digital motion processor. It supports I2C and SPI interfaces, provides an interrupt output, and is used for motion sensing and orientation/sensor-fusion applications.

Manufacturer

The MPU-9150 is manufactured by InvenSense, Inc. InvenSense is a fabless semiconductor company that designs MEMS inertial sensors (accelerometers, gyroscopes, and magnetometers) for mobile devices and other electronics. In 2017, it was acquired by TDK and now operates as the TDK InvenSense subsidiary.

Application

- Orientation/attitude sensing for mobile devices and wearables
- Motion tracking and stabilization for drones, robotics, RC vehicles
- VR/AR headsets and motion controllers
- Gesture recognition and human–computer interaction
- Navigation and heading estimation via sensor fusion
- Gaming peripherals and interactive devices
- Industrial monitoring and vibration analysis
- Sports and fitness tracking

Package

MPU-9150 comes in a 24-pin QFN (LGA) package, typically about 4×4 mm.

Frequently Asked Questions


Q: Is the MPU-9150 a 9-axis motion tracking device?
A: Yes, it integrates a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer for full 9-axis output via I2C.


Q: What is the operating temperature range of this sensor?
A: It operates reliably from -40°C to 85°C, suitable for industrial and consumer environments.


Q: What package type is the MPU-9150 available in?
A: It comes in a compact 24-TFLGA Module (4x4mm), specifically the 24-LGA supplier device package.


Q: Can this component be used in surface mount assembly?
A: Yes, the MPU-9150 supports surface mount technology and is supplied in Tape & Reel packaging for automated production.


Q: Is the MPU-9150 still actively produced or obsolete?
A: This part status is marked as "Obsolete," so it is recommended for existing designs or last-time-buy applications.


Q: What is the output interface type for the sensor?
A: It uses an I2C digital output interface for communication with microcontrollers or processors.


Q: What series does this component belong to?
A: It is part of TDK InvenSense’s MotionTracking™ series, designed for low-power motion tracking applications.


Продукты, связанные с MPU-9150

  • Быстрая цитата

  • Отправьте запрос на котировку MPU-9150 Используя эту форму, мы ответим в течение 12 часов.