Изображения являются только для ссылки
RRH100P03TB1
+БОМMOSFET P-CH 30V 10A 8SOP
-
Производителькомпанией Rohm Semiconductor
-
Мфр. Часть #RRH100P03TB1
-
В наличии6609
365 Дни гарантии качества
7*24 часы обслуживания каранти
90-гарантия послепродажного дня
Гарантия подлинного продукта
Спецификации
| Атрибут | Ценность |
| Supplier | Rohm Semiconductor |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Not For New Designs |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 30 V |
| Current - Continuous Drain(Id) @ 25°C | 10A (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 4V, 10V |
| Rds On(Max) @ Id Vgs | 12.6mOhm @ 10A, 10V |
| Vgs(th)(Max) @ Id | 2.5V @ 1mA |
| Gate Charge(Qg)(Max) @ Vgs | 39 nC @ 5 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 3600 pF @ 10 V |
| Power Dissipation (Max) | 650mW (Ta) |
| Operating Temperature | 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 8-SOP |
Обзор
Description
I can’t locate a public datasheet for RRH100P03TB1. If RRH stands for Remote Radio Head, it would be a compact RF front-end module used in cellular networks, typically located near the antenna and interfacing with a baseband unit via CPRI/eCPRI or similar.
If you want an exact intro, please share the vendor or a link. In the meantime, here’s what an RRH-type entry usually covers:
- Purpose: RF front-end for wireless networks, housing transceiver, power amplifier, filters, and RF paths.
- Key specs to confirm: frequency bands, maximum transmit power (Pout), gain, efficiency, noise figure, return loss, and cooling method.
- Interface/power: control interface (e.g., management, TX/RX control), DC power requirements, and connector types.
- Physicals: dimensions, weight, enclosure rating (IP/temperature range), and mounting.
- Certifications: FCC/CE/ETSI, EMC, environmental approvals.
Provide manufacturer or a product page for a precise, model-specific introduction.
If you want an exact intro, please share the vendor or a link. In the meantime, here’s what an RRH-type entry usually covers:
- Purpose: RF front-end for wireless networks, housing transceiver, power amplifier, filters, and RF paths.
- Key specs to confirm: frequency bands, maximum transmit power (Pout), gain, efficiency, noise figure, return loss, and cooling method.
- Interface/power: control interface (e.g., management, TX/RX control), DC power requirements, and connector types.
- Physicals: dimensions, weight, enclosure rating (IP/temperature range), and mounting.
- Certifications: FCC/CE/ETSI, EMC, environmental approvals.
Provide manufacturer or a product page for a precise, model-specific introduction.
Application
Assuming RRH100P03TB1 is a Remote Radio Head (RRH) for telecom networks, typical application areas include:
- 4G/5G base stations (macro, micro, small cells)
- Outdoor and indoor RRH deployments in urban, suburban, and rural areas
- Distributed Antenna Systems (DAS) for stadiums, airports, campuses
- Edge RAN/fronthaul integration and backhaul aggregation
- Rapid-deploy wireless networks for events or disaster recovery
- 4G/5G base stations (macro, micro, small cells)
- Outdoor and indoor RRH deployments in urban, suburban, and rural areas
- Distributed Antenna Systems (DAS) for stadiums, airports, campuses
- Edge RAN/fronthaul integration and backhaul aggregation
- Rapid-deploy wireless networks for events or disaster recovery
Package
I don’t have the package type for RRH100P03TB1. Please share the manufacturer or a datasheet/link; I can read the exact package (e.g., SOP, QFN, TO-220, etc.) from the Packaging/Mechanical section.
