ADS7843E
Берр Браун
- Lifecycle
- Active
- Stock
- 6691 ПКС
- Package
- SSOP-16
- Series
- Сбор данных - контроллеры сенсорного экрана
Это подробное сравнение ADS7843E и ADS7844N предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS7844N and ADS7843E are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7844N is an 8-channel, 12-bit ADC with a serial interface, while the ADS7843E is a 4-wire touch screen controller with an integrated 12-bit ADC and on-chip drivers. Their channel count, input configuration, control interface, and intended application differ fundamentally, so substituting one for the other is not feasible without a complete redesign of the surrounding circuitry and firmware.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7843E | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both provide 12-bit resolution, so conversion precision is comparable for substitutability. |
| Number of Input Channels | 8 single-ended / 4 differential | 4 single-ended (touchscreen X/Y) | The ADS7844N supports more channels, making it suitable for multi-signal acquisition, while the ADS7843E is dedicated to touchscreen coordinate sensing. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, so host microcontroller compatibility is similar. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Identical supply range means both can operate in the same system power domain. |
| Primary Application | General-purpose 8-channel ADC | Touchscreen controller (resistive) | The ADS7843E includes touchscreen-specific features (pen-down detection, X/Y drive), while the ADS7844N is a general ADC, so they are not directly substitutable in touch applications. |
| Package | SSOP-20 | SSOP-16 | Different pin counts and footprints prevent drop-in board replacement without layout changes. |
| Conversion Rate | Up to 200 kSPS | Up to 125 kSPS | The ADS7844N offers a higher sampling rate, which matters for faster signal acquisition requirements. |
| On-chip Reference | External reference required | External reference required | Both require an external reference, so reference design considerations are equivalent. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7844N |
|---|---|---|
| Part Status | Active | Active |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C |
| Mounting Type | Surface Mount | - |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4, 8 |
| Input Type | - | Differential, Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
The ADS7844N is an 8-channel, 12-bit sampling analog-to-digital converter (ADC) with a serial interface, typically used for general-purpose multiplexed signal acquisition. The ADS7843E is a 4-wire touch screen controller that integrates a 12-bit ADC with an on-chip drivers and control logic specifically for resistive touch screen digitizing. The ADS7844N is a general-purpose ADC, while the ADS7843E is a dedicated touch screen controller.
No. The ADS7844N is offered in a 20-pin SSOP package, while the ADS7843E is offered in a 16-pin SSOP package. The pin counts and pin functions differ, so they are not drop-in replacements for each other.
Both devices use a serial interface, but the protocols differ. The ADS7844N uses a standard SPI-compatible serial interface for reading conversion results. The ADS7843E uses a specific serial interface designed for touch screen coordinate readout, including control bits for channel selection and power-down modes. The interface timing and command structures are not identical.
The ADS7844N provides 8 input channels that can be configured as single-ended or differential pairs. The ADS7843E provides inputs for a 4-wire resistive touch screen (X+, X-, Y+, Y-) and also includes two auxiliary inputs (IN3, IN4) for additional measurements. The channel architecture is fundamentally different due to their intended applications.
No. The ADS7843E is specifically designed as a touch screen controller with a fixed input structure for 4-wire touch screens and two auxiliary inputs. It does not provide the 8-channel multiplexed ADC functionality of the ADS7844N. Substituting one for the other in a general-purpose ADC application is not appropriate.
Both devices typically operate from a single supply voltage in the range of 2.7V to 5.25V. The ADS7844N requires an external reference voltage (VREF) for the ADC. The ADS7843E can operate with an external reference or use the supply voltage as the reference, depending on the configuration. Designers should consult the respective datasheets for exact reference voltage ranges and requirements.
Both devices are designed for low-power operation and are suitable for portable applications. The ADS7843E includes automatic power-down between conversions, which is beneficial for touch screen applications where conversions are intermittent. The ADS7844N also features power-down modes. The choice depends on whether the application requires a general-purpose ADC or a dedicated touch screen controller.