ADS7844N
Техасские инструменты
- Lifecycle
- Active
- Stock
- 1495 ПКС
- Package
- SSOP-20
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS7844N и ADS7841ES/2K5 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS7841ES/2K5 is a functional replacement candidate for the ADS7844N, sharing the same 12-bit SAR architecture, SPI interface, and 4-channel input multiplexer, but it requires validation of the package footprint and supply voltage range before substitution in an existing design.
Техасские инструменты
Техасские инструменты
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7841ES/2K5 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Determines how many analog signals can be measured; the ADS7844N supports twice as many channels, which affects system architecture and multiplexing needs. |
| Resolution | 12 bit | 12 bit | Both provide 12-bit resolution, so measurement precision is equivalent and neither offers an accuracy advantage. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical throughput means both can handle the same signal bandwidth and conversion timing requirements. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges allow either part to operate in the same power domain without level shifting. |
| Interface Type | SPI / QSPI / Microwire compatible serial | SPI / QSPI / Microwire compatible serial | Same serial interface means firmware and microcontroller pin assignments can remain unchanged when substituting. |
| Package / Mounting | 20-pin SSOP (surface mount) | 16-pin SSOP (surface mount) | Different pin counts and footprints require PCB layout changes; the parts are not drop-in replacements. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial environments. |
| Power Consumption (typical) | Approx. 0.9 mW at 5 V, 200 kSPS | Approx. 0.9 mW at 5 V, 200 kSPS | Comparable power draw means thermal and battery-life budgets are unaffected by the choice. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7841ES/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation analog-to-digital converter (ADC) with a serial interface, housed in a 20-pin PDIP package. The ADS7841ES/2K5 is a 4-channel, 12-bit successive-approximation ADC with a serial interface, supplied in a 16-pin SSOP package and provided on tape and reel. The primary differences are channel count (8 vs. 4), package type (PDIP vs. SSOP), and packaging format (tube/tray vs. tape and reel).
No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841ES/2K5 uses a 16-pin SSOP package. The pin counts and package footprints differ, so they are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.
Yes. Both the ADS7844N and the ADS7841ES/2K5 use a serial peripheral interface compatible with SPI, QSPI, and Microwire protocols, allowing direct connection to microcontrollers and DSPs. However, the command set and channel addressing differ because the ADS7844N supports 8 channels while the ADS7841ES/2K5 supports 4 channels.
Both the ADS7844N and the ADS7841ES/2K5 are 12-bit successive-approximation ADCs. The ADS7844N supports a throughput rate of up to 200 kSPS, and the ADS7841ES/2K5 also supports up to 200 kSPS. Both operate from a single 2.7 V to 5.25 V supply.
No. Because the ADS7844N is a 20-pin PDIP device with 8 input channels and the ADS7841ES/2K5 is a 16-pin SSOP device with 4 input channels, a direct drop-in replacement is not possible. A replacement requires PCB redesign to accommodate the different package, pinout, and reduced channel count.
The ADS7844N provides 8 input channels that can be configured as single-ended or differential pairs. The ADS7841ES/2K5 provides 4 input channels, also configurable as single-ended or differential inputs. The channel configuration is selected through the serial command word.
Both the ADS7844N and the ADS7841ES/2K5 are specified for operation over the industrial temperature range of -40°C to +85°C, as documented in their respective manufacturer datasheets.
Both devices are designed for low-power operation and feature a power-down mode between conversions. The ADS7844N typically consumes approximately 1.8 mW at 200 kSPS with a 5 V supply, while the ADS7841ES/2K5 typically consumes approximately 1.5 mW at 200 kSPS with a 5 V supply. Exact values should be confirmed against the latest manufacturer datasheets for the specific grade and supply voltage.