ADS7844N vs ADS7842E/1KG4

Это подробное сравнение ADS7844N и ADS7842E/1KG4 предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7844N and ADS7842E/1KG4 are not drop-in replacements for one another. The ADS7844N is an 8-channel, 12-bit SAR ADC in a 20-pin PDIP package with a serial interface, while the ADS7842E/1KG4 is a 4-channel, 12-bit SAR ADC in a 20-pin SSOP package with a parallel interface. The differences in channel count, package footprint, and digital interface architecture require board redesign and firmware changes, making direct substitution impractical without validation.

Different channel count Different package footprint Different digital interface Different pinout

Parts at a glance

Part A

ADS7844N

Техасские инструменты

Lifecycle
Active
Stock
1495 ПКС
Package
SSOP-20
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)
Part B

ADS7842E/1KG4

Техасские инструменты

Lifecycle
Active
Stock
9177 ПКС
Package
SSOP-28
Series
Сбор данных - аналогово-цифровые преобразователи (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7842E/1KG4 Why it matters
Resolution (bits) 12 12 Both are 12-bit ADCs, so resolution is equivalent and not a differentiator for substitutability.
Number of input channels 8 (single-ended) / 4 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many signals can be multiplexed into one ADC; the ADS7844N supports twice as many inputs.
Sampling rate (max) 200 kSPS 200 kSPS Throughput is identical, so timing-critical designs can generally swap without resampling budget changes.
Interface SPI / serial (4-wire) Parallel (byte-wide) The digital interface differs fundamentally; SPI versus parallel affects pin count, host wiring, and firmware, so they are not drop-in substitutes.
Supply voltage 2.7 V to 5.25 V 5 V (single supply) The wider supply range of the ADS7844N allows 3.3 V operation, while the ADS7842E requires a 5 V rail.
Package 20-pin SSOP 28-pin SSOP Different package footprints and pin counts prevent direct board-level replacement without layout changes.
Reference input External reference External reference Both require an external reference, so reference design considerations are similar for either part.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ratings mean environmental suitability is the same for both devices.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7844N ADS7842E/1KG4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 200k 200k
Number of Inputs 4, 8 4
Input Type Differential, Single Ended Single Ended
Data Interface SPI Parallel
Configuration MUX-S/H-ADC MUX-S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Features - Selectable Address
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS7844N and the ADS7842E/1KG4?

The ADS7844N is an 8-channel, 12-bit successive-approximation register (SAR) analog-to-digital converter (ADC) with a serial SPI/QSPI/Microwire interface, housed in a 20-pin SSOP package. The ADS7842E/1KG4 is a 4-channel, 12-bit SAR ADC with a parallel interface, supplied in a 28-pin SSOP package. The ADS7844N provides twice the input channel count and a serial interface, while the ADS7842E/1KG4 offers a parallel data bus for faster host-side readback.

Are the ADS7844N and ADS7842E/1KG4 pin-to-pin or package compatible?

No. The ADS7844N is packaged in a 20-pin SSOP, whereas the ADS7842E/1KG4 is packaged in a 28-pin SSOP. The differing pin counts and pin functions preclude direct PCB footprint compatibility, so a board redesign or adapter is required to interchange these devices.

How do the analog input configurations of the ADS7844N and ADS7842E/1KG4 differ?

The ADS7844N provides 8 single-ended inputs or 4 differential input pairs, selectable via its input multiplexer. The ADS7842E/1KG4 provides 4 single-ended inputs or 2 differential input pairs. Designs requiring more than four single-ended channels must use the ADS7844N or add an external multiplexer ahead of the ADS7842E/1KG4.

What are the supply voltage and reference requirements for these two ADCs?

Both devices operate from a single 2.7 V to 5.25 V analog supply and support an external reference voltage that sets the full-scale input range. The reference input range and analog supply must be verified against the respective manufacturer datasheets for the specific operating conditions of the target design.

How do the digital interfaces of the ADS7844N and ADS7842E/1KG4 compare?

The ADS7844N uses a serial interface compatible with SPI, QSPI, and Microwire, reducing pin count and simplifying isolation. The ADS7842E/1KG4 uses a parallel interface with a full data bus, which allows higher throughput to the host controller but requires more I/O pins and board routing.

Can the ADS7844N and ADS7842E/1KG4 be used interchangeably in an existing design?

No. Differences in package pin count, interface type (serial versus parallel), and channel count mean the two devices are not drop-in replacements. Any substitution requires schematic, layout, and firmware changes validated against the manufacturer datasheets.

What resolution and converter architecture do the ADS7844N and ADS7842E/1KG4 share?

Both are 12-bit successive-approximation register (SAR) ADCs. They share the same resolution and conversion principle, so selection between them should be based on channel count, interface type, and package rather than resolution.