ADS7844N
Техасские инструменты
- Lifecycle
- Active
- Stock
- 1495 ПКС
- Package
- SSOP-20
- Series
- Сбор данных - аналогово-цифровые преобразователи (ADC)
Это подробное сравнение ADS7844N и ADS7842EB предоставляет ценную информацию об их технических характеристиках и ключевых особенностях. Мы подробно рассматриваем важные факторы, включая соответствие требованиям RoHS, статус REACH, серию, способ монтажа, тип корпуса и другие соответствующие характеристики. Представление различий рядом упрощает выбор компонентов, облегчая вам выбор оптимального варианта для вашего конкретного применения.
Replacement verdict
The ADS7844N and ADS7842EB are not drop-in replacements for one another. Although both are 12-bit successive-approximation ADCs from Texas Instruments, they differ in channel configuration, analog input architecture, package footprint, and serial interface framing, so a direct board-level substitution is not possible without redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7842EB | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit ADCs, so conversion resolution is equivalent and neither offers a resolution advantage for substitutability. |
| Number of Input Channels | 8 single-ended / 4 differential | 4 single-ended / 2 differential | The ADS7844N supports twice as many input channels, which affects how many signals can be multiplexed into a single converter. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical throughput means timing and signal bandwidth requirements are met equally by both parts. |
| Interface Type | SPI / QSPI / Microwire serial | Parallel (byte/word) | The interface differs fundamentally: ADS7844N uses a serial bus while ADS7842EB uses a parallel bus, so they are not drop-in compatible at the system level. |
| Supply Voltage | 2.7 V to 5.25 V | 5 V (single supply) | The wider supply range of the ADS7844N allows low-voltage operation, whereas the ADS7842EB requires a 5 V rail. |
| Package | 20-pin SSOP | 28-pin SSOP | Different pin counts and footprints mean the two devices are not physically interchangeable on the same PCB layout. |
| Input Type | Single-ended / differential | Single-ended / differential | Both support single-ended and differential inputs, so signal conditioning topology can remain similar. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial-grade environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7842EB |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Features | - | Selectable Address |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation register (SAR) analog-to-digital converter with a serial SPI/QSPI/Microwire interface, housed in a 20-pin SSOP package. The ADS7842EB is a 4-channel, 12-bit SAR ADC with a parallel interface, housed in a 28-pin SSOP package. The ADS7844N provides twice the input channel count and a serial interface, while the ADS7842EB offers a parallel interface for faster host connectivity.
No. The ADS7844N uses a 20-pin SSOP package, while the ADS7842EB uses a 28-pin SSOP package. The differing pin counts and package sizes mean they are not pin-to-pin compatible and cannot be dropped into the same PCB footprint without redesign.
The ADS7844N provides 8 input channels that can be configured as single-ended or differential pairs. The ADS7842EB provides 4 input channels, also configurable as single-ended or differential inputs. The ADS7844N is therefore better suited to applications requiring more analog input channels.
The ADS7844N uses a serial interface compatible with SPI, QSPI, and Microwire protocols, reducing pin count and board routing. The ADS7842EB uses a parallel interface, which provides faster data throughput to the host processor but requires more I/O pins. The choice depends on host interface availability and throughput requirements.
Both devices are 12-bit SAR ADCs. However, their maximum throughput rates differ: the ADS7844N supports up to 200 kSPS, while the ADS7842EB supports up to 200 kSPS as well. Designers should confirm the exact rated throughput from the respective manufacturer datasheets for the specific grade and operating conditions.
Both the ADS7844N and ADS7842EB operate from a single 2.7 V to 5.25 V analog supply. Each requires an external reference voltage applied to its VREF pin to set the full-scale input range. The reference voltage must be stable and within the device's specified limits as documented in the respective datasheets.
The ADS7844N is generally more suitable for space-constrained designs with limited host I/O, because its serial interface requires fewer pins and its 20-pin SSOP package is smaller than the 28-pin SSOP of the ADS7842EB. The ADS7842EB's parallel interface is preferable when host I/O is abundant and higher data throughput is needed.
No. Due to differences in package pin count, interface type (serial versus parallel), and channel count, the two devices are not interchangeable without PCB redesign and firmware changes. A substitution requires validating package footprint, interface timing, channel configuration, and reference circuitry against the manufacturer datasheets.